9 VOLT BATTERY SNAP SWITCH (1) Online Hot Sale

The 1 Amp switch is a push-on, push-off switch. We have pre-connected the switch and battery strap, nothing left to do but connect your choice of LED lights.

Yes! It really is just that easy!

Package contains one 9 volt battery connector with leads and on off switch.

• Twist the red leads on your lights with the red lead on this 12 inch strap.
• Protect the connection with tape or shrink tube.
• Then twist the black leads on your LEDs to the black lead on this strap. Again protect the connection.
• Optional: to make your connections even stronger you can use solder on the connection joints
• Go! Snap on the strap to any 9V DC battery.
• Press the locking switch and have a light show!
• Press again to turn off.

• And you can connect A LOT of LEDs to this sturdy system.

  • In our tests, 50 flashing LEDs shone nice and bright on a 9V battery for 4 1 2 hours.
  • 3 LEDs were bright for 36 hours.
  • If you are running less than 50 and more than 3, your run time per battery will be in the range between those low and high numbers.

  • The battery snap switch can handle solid and flashing LEDs. There is no carryover flash. Up to 50 LEDs flashing, solid or both can run on one 9 volt battery.

    Dimensions

    Switch: 0.32 inches x 0.48 inches x 0.31 inches tall

    Strap: Black Lead 12  Red Lead 13

    Switch is on red lead, 8.5 inches from the snap, leaving 4 after the switch free

    If you need more control, consider the battery snap with TWO switches!  This double switch is great to individually control two different items, like a siren plus lights, or lights on different parts of a model or lights on different floors of a roombox.  Refer to the diagram.

    • 12 inch red wire
    • 3.75 inch to the split
    • each split has 4 inches to the switches
    • 4 inches free after the switches.